Description
How to MAKE yours
-
Get V5 Pilot and Feedstock lite
2. Get FlashForge AD5M and unlock it!
Adventurer5M-KlipperMod-v00.05-beta-klipperscreen.tgz
3. Rewrite next files.
rewrite next macros file
Use this start g-code command on orca slic3r
START_PRINT BED_TEMP={bed_temperature_initial_layer[current_extruder]} EXTRUDER_TEMP={nozzle_temperature_initial_layer[current_extruder]}
Use this end g-code command on orca slic3r
END_PRINT
4. Print next special parts
5. Assemble it
Wiring heater and thermistor JST 2.5 4pin
Extend Motor wires 30mm JST 2.54 4pin
Extend layer fan wires 30mm JST 1.25 4pin
Reviews
There are no reviews yet.