Pellet Extruder V3

(2 opiniones de los clientes)


Piezas incluidas / Included parts

1 x Pellet screw Ø8 x 80 mm
1 x Barrel Ø20 x 50 mm
1 x Nema 17 gear motor
1 x Coupling Ø20×30 mm
1 x Nozzle Ø0.8 mm
1 x Cartridge heater 50w 12v
1 x Thermistor 100k
2 x Supports
2 x Blowers 40 x 20 mm
4 x Spacers M3 x 60 mm
6 x Screws M3 x 20 mm
4 x Screws M3 x 10 mm

Piezas imprimibles no incluidas, descargar aquí

Printable parts not included, download here

Tiempo de entrega 15 días  

Delivery time 15 days

Disponible sobre pedido

Categorías: , Etiquetas: , ,


Cabezal de impresión 3D directamente de gránulos fundibles, plásticos vírgenes y reciclados, MIM, composites, ceras, etc.

3D printhead direct from meltable  granules, virgin and recycled plastics, MIM, composites, wax, etc. 

Información adicional

Peso 750 g
Dimensiones 150 × 120 × 70 mm

2 opiniones de Pellet Extruder V3

  1. Luca de sanctis

    Hi i would like to buy your exthruder. i should know few features of your kit:
    -the screw is covered by nichel or not?
    -Wich i s the max temperature of the hot end? it possible to have resistor in hot end with max temp around 300 °?
    – if not wich is the max temp of thermistore?
    i should buy early as i can. than please let me know this few information, to keep me able to evaluae the product.
    If you can answer fast, i will buy quicly.
    Best regards,Luca

    • admin

      The screw is not covered with nickel, shaft steel Ø8mm, steel Cf53 hardened and ground.

      Hardness HRc: 60 +/-2

      Roughness Ra = 0,3 µm, Rz = 1,6 µm

      Conventional depth min. 0.4mm

      Rounding: 4µm

      Parallelism: 6 µm/1000mm

      Tolerance: h6

      the thermistor is from 100k up to 300 degrees

      resistance 12v 50w

  2. BEURY

    Hi, I would like to buy your extruder.
    I would like to know one information about your kit: is it possible to have the same system in 24 V?
    Thank you for your help,
    Best regards,

Añadir una opinión

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *